ESU - V5 Sound Decoders
Please note that prices include Free Post & Packaging - Also please be aware that at this time we are un-able to sell decoders with custom sounds on. Should you require a specific sound blowing to a decoder, all decoders are sold as "blank" unless otherwise requested. Please ask upon ordering and we may be able to facilitate this at the time of purchase by adding Stock ESU sounds onto the decoder. This may result in their being a delay in the dispatch of your order.
When ordering please specify the correct product code to allow us to send you the correct decoder - if the decoder your after does not appear on the page below - please contact us and we'll be happy to help
58513 - LokSound 5 XL Blank Decoder, with Screw Terminals
£199.99
|
Please note price does not include a speaker
The LokSound 5 XL decoder is quite a big piece of equipment. It has to be, because it is intended for use in large scale model railways, e.g. garden railways and 1 gauge models. Its integral PowerPack matching the increased motor power assures reliable operation even on dirty tracks. |
58515 - LokSound 5 XL Blank Decoder, with pinheader
£199.99
|
Please note price does not include a speaker
The LokSound 5 XL decoder is quite a big piece of equipment. It has to be, because it is intended for use in large scale model railways, e.g. garden railways and 1 gauge models. Its integral PowerPack matching the increased motor power assures reliable operation even on dirty tracks. |
58315 - Loksound 5 L Blank Decoder, with pinheader adapter board
£174.99
|
Please note price does not include a speaker
LokSound 5 L is intended for use in all applications where the required power exceeds the limits of LokSound 5. Ideally these are 0 gauge vehicles and also smaller 1 gauge locomotives. Despite its compact dimensions of only 50.8 mm x 25.4 mm x 14 mm it is equipped with a dual speaker output and integral PowerPack. The LokSound 5 is equipped with a multi-pin connector and is supplied ex works with an adapter board featuring solder pads. |
58410 - Loksound 5 8 Pin Blank Decoder,with 11mmx15mm Speaker & Power Pack leads
£99.99
|
Please note price includes a sugarcube speaker
The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive. LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure. |
58412 - Loksound 5 Plux22 Blank Decoder,with 11mmx15mm Speaker & Power Pack leads
£99.99
|
|
Please note price includes a sugarcube speaker
The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive. LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure. |
58419 - Loksound 5 21MTC Blank Decoder,with 11mmx15mm Speaker & Power Pack leads
£99.99
|
|
Please note price includes a sugarcube speaker
The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive. LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure. |
ESU Accessories
When ordering please specify the correct product code to allow us to send you the correct item - if the item your after does not appear on the page below - please contact us and we'll be happy to help
53451 - Lok Programmer for ESU Decoders
£139.99
|
USB to Serial Cable IS included
You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco around the corner in the yard – on your model railroad? No problem with ESU’s LokProgrammer! One prerequisite: A PC with sound card and Windows. Simply record the original sound of your engine and edit it at home with your computer. Many customers did this already successfully. Even if you don’t yet belong to this elite group of LokSound Pro’s, the LokProgrammer is still a very useful tool for you. It is the easiest way to program your ESU-decoder. You need no programming experience, thanks to the graphic screen everything falls into place with a few mouse clicks. Full information on the lokprogrammer can be found here What the LokProgrammer can do:
|
